Leading in drainage
Führend in Entwässerung
KESSEL Logo
search:
 >  > Installation Grease Separators "D+S"

Installation Grease Separators "D+S"

KESSEL Version „D+S“ grease separators are designed according to EN 1825-1 and are equipped with a manually controlled pump for mixing and cleaning of the separator´s contents and inner walls. These separators distinguish themselves through their ease of installation and nearly maintenance free characteristics.

The advantage of the Version „D+S“ separators is that disposal can take place through permanently installed disposal lines while the twin covers of the separator remain closed. With this advantage, the disposal truck hooks up to a connection on an exterior wall of the building and, using its own pump, suction out the entire contents of the separator without any unpleasant odors escaping. The Shredder-Mix- System macerates and liquifies its contents and also cleans its interiror walls all simultaneously. This prepared wastewater is then suctioned into the waiting disposal vehicle.

According to DIN V 4040-2, the complete contents of the separator should be emptied, the unit cleaned and refilled with clean cold water every fourteen days or at a minimum of once every month.

Installation hints:

  • A sampling chamber is to be installed immediately after the grease
    separator.
  • The separator is installed completely level on a flat firm surface in a
    frost free area.
  • The height of the room in which the separator is installed should
    allow easy removal and access of the two separator covers.
  • In the case that the outlet of the separator is located below the local defined backwater level, a lifting station is to be installed according to DIN EN 12056. In situations where the interruption of separator service is not allowable, a lifting station with double pumps is to be installed.

Notice:

  • The KESSEL “D+S” grease separator is ideal for installations where the presence of strong odors during disposal of the separator´s contents can not be permitted.
  • The “Shredder-Mix-System” liquifies, macerates and cleans the separator´s contents all in one step.
  • In circumstances where large amounts of sludge are expected (i.e. slaughterhouses / meat processing plants), the separator should be equipped with two macerating pumps - one pump for the wastewater and grease, the second pump solely for the sludge. For further information please contact your KESSEL distributor.

Contact

If you are interested in KESSEL products or if you need technical information please get in contact with us:

Everhard Industries Pty Ltd
405 Newman Rd,
4034 Geebung, Qld
Telefon: 61 7 3637 6444
Telefax: 61 7 3265 2111
www.everhard.com.au

 

©2012 KESSEL AG
Bahnhofstraße 31, 85101 Lenting, Germany
Imprint / Impressum
Privacy policy